Tow Bar Hitch
$60.00Tow Bar Hitch
Material: 7 GA Carbon Steel, Stainless Steel Pin
Finish: Bengal Black Powder Coat paint
Measurement: 3-1/4″ x 3-1/2″
Showing 129–144 of 146 results
Tow Bar Short Tube
$50.00Tow Bar Short Tube
Measurement: Approximately 1″ x 1-1/2″ x 12″
Material: Standard Steel Rectangle Tubing
Finish: Bengal Black Powder Coat paint
Includes: (1) 12″ Tow Bar Short Tube
TrailBlazer 20
$700.00TrailBlazer 20
SnowGroomers.net’s newest addition Ultra Light Weight Snow Groomer to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile. Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set a compacted corduroy snow trail system. Lots of folks want to build their own snow groomers. Often they want to save money. This takes time and trial and error. The TrailBlazer is meant so you can afford it and take a lot less time than building your own. It is built to not rust or rot so it will last many years.
Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and corduroy.
Note: Not recommended for
– professional or extensive snow trail grooming
– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.
TrailBlazer Cutter Plate
$80.00TrailBlazer Cutter Plate
TrailBlazer Cutter Plate is used to precondition the snow covered trail in a similar corduroy pattern of the TrailBlazer comb.
Replacement part is pre-drilled to align and fit the TrailBlazer chassis.
TrailBlazer Swivel Coupler
$30.00Trail Blazer Swivel Coupler
Designed to easily rotate 360 degrees to enable the TrailBlazer chassis to remain flat on the surface to enable proper grooming. Constructed of 1/8″ zinc plated mild steel with stainless steel hardware enabling rust resistance and durability for a long useful life.
Includes:
(1) 1″ Zinc plated drawbar swivel coupler
(1) 3/8″-16 x 2″ Stainless Steel Hex Head Bolt
(1) 3/8″-16 Stainless Steel Nylock Hex Nut
(2) 3/8″ Stainless Steel Flat Washers
NOT Included:
TrailBlazer XC 20
$700.00TrailBlazer XC 20
Snow Groomers newest addition to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile. Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set classic cross-country / nordic ski tracks.
Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and track setting.
Note: Not recommended for
– professional or extensive snow trail grooming
– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.
TrailBlazer XC 36
$900.00TrailBlazer XC 36
Snow Groomers newest addition to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile. Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set classic cross-country / nordic ski tracks.
Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and track setting.
Note: Not recommended for
– professional or extensive snow trail grooming
– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.
TrailBlazer XC Cutter Set
$40.00TrailBlazer XC Cutter Set
TrailBlazer XC Cutter Set is used to break ice and hard packed snow from the area in front of the Track Molds prior to setting the Classic Ski Tracks.
TrailBlazer XC Track Mold
$40.00TrailBlazer XC Track Mold
Each Track Mold is assembled from two separate parts. 1: Install the Track Mold bottom (1″ thick HDPE) using the included 5/16 hex bolts. 2: Apply Medium Black ABS Cement (Not Included). 3: Line up the pre-drilled holes of the Track Mold Cover and tighten with the included #10 Self-Tapping Screws.
TRAKOR Lower Weight Cushion
$30.00TRAKOR Lower Weight Cushion
Material: .250″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 15-1/4″ x 15-3/4″
Includes: (2) Pre-installed strips of industrial double-sided adhesive tape.
TRAKOR Sled Skin
$50.00TRAKOR Sled Skin
Material: HDPE
Measurement: 19-5/8″ x 26-1/4″
Thickness: Minimum .130
Includes: (14) stainless steel pop rivets for installation
TRAKOR Stainless Steel Cutters (Set of 2 – RH & LH)
$70.00TRAKOR Stainless Steel Cutters
Measurement: Approximately 3-3/4″ x 1-1/4″ x 1-1/4″
Material: 10 GA Stainless Steel
Finish: Stainless Steel
Includes: (1) LH TRAKOR Cutter, (1) RH TRAKOR Cutter, (4) 5/16-18 x 3/4″ Stainless Steel Carriage Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts
TRAKOR Track Mold (Set of 2)
$200.00TRAKOR Track Mold
Material: Molded Urethane
Measurement: Approximately 15-3/4″ x 5″ x 1-3/8″
Includes: (2) TRAKOR Track Molds, (6) 5/16-18 x 3/4″ Stainless Steel Hex Bolts
UTV Universal Hitch 1″
$80.00UTV 1″ Universal Hitch is made of 3/16″ Carbon Steel and finished with a durable Bengal Black powder coated paint. The UTV 1″ includes a round hole to place a 1″ Bolt or Ball Hitch through to attach to the receiver of your UTV (with Tracks recommended), Snow Cat, or other towing device with a standard 2″ tow receiver. The UTV 1″ Universal Hitch enables you to easily attach one of our three Pin Couplers. The UTV 1″ Universal Hitch includes a 5/16″ x 3-1/2″ Clevis Pin enabling 180 degree vertical movement. Vertical movement of the UTV Hitch combined with the horizontal movement along the 3/8″ Orange Handle Detent Pin (Sold Separately) offers a smooth pull even over uneven snow pack allowing the snow grooming chassis to remain flat giving you a more even snow packed trail.
