Showing 81–96 of 147 results
Upgrade your current Snow Groomers Hitch Plate and Coupler (Pin or Ring) with a 750 ft-lb. break rating. With the included 13/64″ drill bit, drill through the existing shear pin holes in both the coupler and hitch plate receiver then insert the new 3/16″ Zinc Yellow-Chromate plated Wire-Lock Shear Pin.
SLED Universal Hitch
Fits most snowmobile rear bumper bars and many ATV rear bumper bars. Easy to install, with no tools required and adjusts to fit 12-1/4″ to 20″ openings on bumper bars of 1″ up to 2-1/4″. Eliminate the side to side movement as seen with other bolt on hitches. Made of 10 GA steel plate and powder coated for long durability and rust protection. All hardware is made of stainless steel. Connect your snow grooming equipment using the standard pin coupler included in all of our pin type groomer bundles.
Measurement: Approximately 1″ x 2″ x 82″
Material: 11 GA Standard Steel Rectangle Tube
Finish: Bengal Black Powder Coat paint
Includes: (1) Left Hand SM48 Drawbar, (1) Right Hand SM48 Drawbar, (2) .125″ x 1-15/16″ Stainless Steel Hitch Pins, (2) 1/2″ Zinc plated Washer
Measurement: 6-1/2″ x 8-1/4″
Material: 12 GA Carbon Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (1) Upper Hitch Plate w/ Receiver, (1) Lower Hitch Plate, (4) 5/16-18 x 3″ Stainless Steel Carriage Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts, (1) Anti-Seize Packet
Measurement: Approximately 1-1/2″ x 14-1/2″ x 49″
Material: 1″ x 1-1/2″ 11 GA Rectangle Tubing, 7 GA Standard Steel plate
Finish: Bengal Black Powder Coat paint
Includes: (1) SM48 Sub-Frame, (4) 3/8-16 x 1-3/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts
Measurement: Approximately 24″ x 13-1/2″
Material: .125 ABS
Finish: Black ABS, Haircell outward side, smooth inward side
Includes: (2) 24″ Weight and Bow Covers, (14) #68 Pop Rivets
Measurement: Approximately 1″ x 2″ x 82″
Material: 11 GA Standard Steel Rectangle Tube
Finish: Bengal Black Powder Coat paint
Includes: (1) Left Hand SM72 Drawbar, (1) Right Hand SM72 Drawbar, (2) .125″ x 1-15/16″ Stainless Steel Hitch Pins, (2) 1/2″ Zinc plated Washer
Measurement: Approximately 7-1/4″ x 11″
Material: 12 GA Carbon Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (4) 5/16-18 x 3″ Stainless Steel Carriage Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts, (1) Anti-Seize Packet
Measurement: Approximately 2″ x 14″ x 73″
Material: 1″ x 2″ 11 GA Rectangle Tubing, 7 GA Standard Steel plate
Finish: Bengal Black Powder Coat paint
Includes: (1) SM72 Sub-Frame, (4) 3/8-16 x 1-3/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts
Measurement: Approximately 24″ x 13-1/2″
Material: .125 ABS
Finish: Black ABS, Haircell outward side, smooth inward side
Includes: (3) 24″ Weight and Bow Covers, (21) #68 Pop Rivets
Measurement: Approximately 3″ x 26″ (Overall)
Material: 1-1/2″ x 3″ 11 GA Rectangle Tube, 7 GA Standard Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (1) Cross tube, (4) 3/8-16 x 2-1/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts
Measurement: Approximately 1″ x 11″- 13″ (adjustable range)
Material: 1″ x 11 GA Standard Steel Tube, 7 GA Standard Steel (Tabs)
Finish: Stainless Steel Locking Nut, Bengal Black Powder Coat Paint
Includes: (1) Front Link, (2) Clevis Pins, (2) Hitch Pins
Measurement: Approximately 4-1/2″ x 5″ x 15″
Material: Stainless Steel Screw, 7 GA Standard Steel Plate, 16 GA Standard Steel Plate, 1/2″ Standard Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (1) Lift Tower Assembly, (1) Clevis Pin, (1) Hitch Pin, (2) 3/8-16 x 2-1/2 Stainless Steel Tap Bolts, (2) 3/8-16 Stainless Steel Nylock Nuts
Measurement: Approximately 1-1/2″ x 9″
Material: 3/8″ Standard Steel, 7 GA Standard Steel (Tab)
Finish: Bengal Black Powder Coat Paint
Includes: (1) Lifting Link, (2) Clevis Pins, (2) Hitch Pins
Measurement: Approximately 10″ x 7 ”
Material: 7 GA Standard Steel
Finish: Bengal Black Powder Coat Paint
Measurement: Approximately 33″ x 31″ (Overall Footprint)
Material: 1 x 1-1/2″ x 11 GA Rectangle Tube, 10 GA Standard Steel Plate, 3/8″ Standard Steel Plate
Finish: Bengal Black Powder Coat Paint