Snow Groomers & Snow Grooming Equipment for winter sports.
Category: Narrow Trail (20″ – 44″ Trail Width)
Application: Create compacted corduroy trail great for dog sledding, fat bike trails, tubing runs, snow shoeing / hiking trails, and so much more.
Recommended Towing Machine:
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available)
6in RING Coupler (3″ & 5″ Offsets available)
12″ Standard Wing Set
36″ SNO-RAZOR & Deflector
LOPPET 60 Drawbar
Standard 44 Drawbar
CUSTOM 20″ – STEEL SNOW GROOMER
Build YOUR perfect 20″ groomer with the options and accessories below!
*The SNO-BLASTER is only available with the LOPPET 60 Drawbars.
SnowGroomers.net’s newest addition Ultra Light Weight Snow Groomer to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile. Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set a compacted corduroy snow trail system. Lots of folks want to build their own snow groomers. Often they want to save money. This takes time and trial and error. The TrailBlazer is meant so you can afford it and take a lot less time than building your own. It is built to not rust or rot so it will last many years.
Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and corduroy.
Note: Not recommended for
– professional or extensive snow trail grooming
– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.
Snow Groomers newest addition to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile. Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set classic cross-country / nordic ski tracks.
Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and track setting.
Note: Not recommended for
– professional or extensive snow trail grooming
– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.
Snow Groomers newest addition to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile. Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set classic cross-country / nordic ski tracks.
Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and track setting.
Note: Not recommended for
– professional or extensive snow trail grooming
– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.
Category: Narrow Trail (20″ – 44″ Trail Width)
Application: Great to tackle fresh powder or deep snow and create compacted corduroy trail great for dog sledding, fat bike trails, tubing runs, snow shoeing / hiking trails, and so much more.
Recommended Towing Machine:
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available) 6in RING Coupler (3″ & 5″ Offsets available) 12″ Standard Wing Set
SNO-BLASTER V-PLOWCategory: Nordic / Cross-Country
Application:
Recommended Towing Machine:
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available) 6in RING Coupler (3″ & 5″ Offsets available) 12″ Standard Wing Set 36″ SNO-RAZOR & Deflector
DeTRAKOR LOPPET 60 Drawbar Standard 44 Drawbar
Category: Wide Trail
Application:
Recommended Towing Machine:
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available) 6in RING Coupler (3″ & 5″ Offsets available) 12″ Standard Wing Set 48″ SNO-RAZOR & Deflector
48″ Wheel KitCategory: Wide Trail
Application:
Recommended Towing Machine:
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available) 6in RING Coupler (3″ & 5″ Offsets available) 12″ Standard Wing Set 72″ SNO-RAZOR & Deflector 72″ Wheel Kit
2024 SNO-RAZOR® V2.0 – UPGRADE KIT
Do you already have a SnoMaster 48 or 72 built before 2024? Upgrade it now to Version 2.0!
Build YOUR perfect SNO-RAZOR® UPGRADE KIT with the options below!
**Does not include the Chassis.
SNO-MASTER® – STEEL SNOW GROOMER
Build YOUR perfect SNO-MASTER® groomer with the options and accessories below!
**ALL SNO-MASTERS WILL SHIP WITH THE NEW V2.0 DRAWBARS.
NEW SNO-MASTER® 48 V2 – RAZOR
NEW SNO-MASTER® 48 V2 – RAZOR AND WHEELS
NEW SNO-MASTER® 48 V2 – RAZOR, WHEELS, TOWBAR & TRAKOR
NEW SNO-MASTER® 48 V2 – SNO-RAZOR, WHEELS, TOWBAR & TRAKOR / DETRAKOR
NEW SNO-MASTER® 48 V2 – STANDARD
NEW SNO-MASTER® 72 V2 – SNO-RAZOR
NEW SNO-MASTER® 72 V2 – SNO-RAZOR & WHEELS
NEW SNO-MASTER® 72 V2 – SNO-RAZOR, WHEELS, TOWBAR & DOUBLE TRAKOR / DETRAKOR
NEW SNO-MASTER® 72 V2 – SNO-RAZOR, WHEELS, TOWBAR & TRAKOR
Category: Nordic / Cross-Country
Application: Parks & Recreation 72″-96″ wide corduroy groomed trail with a single classic track setter (TRAKOR) that can be attached on the left, center, or right side of the groomed path.
Recommended Towing Machine:
Included Accessories:
6in STD PIN Coupler – or – 6in RING Coupler
SNO-MASTER Chassis
SNO-MASTER Drawbar & Sub-Frame
SM Rear Hitch
20″ TRAKOR Chassis 44 Standard Drawbar w/ Pin Coupler (2) 12″ Standard Wing Set SNO-RAZOR & Deflector
(1) SNO-MASTER® 48 with RAZOR
(1) TRAKOR STANDARD with REAR TOWHITCH
(1) SNO-MASTER® 72 with RAZOR
(1) TRAKOR STANDARD with REAR TOWHITCH
Category: Nordic / Cross-Country
Application: Parks & Recreation 72″-96″ wide corduroy groomed trail with a single classic track setter (TRAKOR) that can be attached on the left, center, or right side of the groomed path or removed for 72″-96″ wide Skate Trails. Includes wheel kit and towbar assembly to easily maneuver the grooming chassis over non-snow covered surfaces.
Recommended Towing Machine:
Included Accessories:
6in STD PIN Coupler – or – 6in RING Coupler SNO-MASTER Chassis SNO-MASTER Drawbar & Sub-Frame 20″ TRAKOR Chassis 44 Standard Drawbar w/ Pin Coupler (2) 12″ Standard Wing Set SNO-RAZOR & Deflector
Wheel Kit
Tow Bar Assembly
(1) SNO-MASTER® 48 with RAZOR & WHEEL KIT
(1) Single Side Towbar Assembly (#100-6070) $250 USD
(1) TRAKOR STANDARD with DeTRAKOR
(1) SNO-MASTER® 48 with RAZOR & WHEEL KIT
(1) SM48 Full Towbar Assembly (#100-6060) $450 USD
(1) TRAKOR STANDARD with DeTRAKOR
(1) SNO-MASTER® 72 with RAZOR & WHEEL KIT
(1) Single Side Towbar Assembly (#100-6070) $250 USD
(1) TRAKOR STANDARD with DeTRAKOR
(1) SNO-MASTER® 72 with RAZOR & WHEEL KIT
(1) SM72 Full Towbar Assembly (#100-6050) $500 USD
(1) TRAKOR STANDARD with DeTRAKOR
(1) SNO-MASTER® 72 with RAZOR & WHEEL KIT
(1) SM72 Full Towbar Assembly (#100-6050) $500 USD
(2) TRAKOR STANDARD with DeTRAKOR
Showing 1–16 of 147 results
.093 Hitch Pins enable a secured Drawbar connection when using the Loppet 60 Drawbars, Best-Line 76 Drawbars, Path-Master Drawbars, Sno-Blaster Drawbars, or the Standard 44 Drawbar. Hitch Pin clip diameter (.093) is measured on the outside of the wire and is manufactured of Stainless Steel 18-8 with a total length of 1-5/8″. A total of (2) Hitch Pins are required when securing the Drawbars, one for each side, to a 20″ Snow Trail Grooming Chassis
(4) Stainless Steel .125 x 1-15/16 Hitch Pins
Used to secure drawbars to chassis or to secure SNO-BLASTER Clevis Pins on assembly.
Measurement: Approximately 10″ x 3-1/2″ (Tire), 5/8″ (Axle Bore)
Material: Steel Wheel, Knobby All-Terrain Rubber Tire
Finish: Silver Enamel Powder Coat paint
Maximum Work Load: 300 lbs.
(1) Left Wing & Bracket
(1) Right Wing & Bracket
(4) 1/4-20 x 7/8″ Stainless Steel Hex Bolts
(4) 1/4-20 Stainless Steel Nylock Nuts
Used on SNO-MASTER 48, SNO-MASTER 72, SNO-BLASTER, TRAKOR, and PATH-MASTER
3/8″ zinc coated 2″ Ball Adapter is designed to work with a Snow Groomers Pin Coupler to quickly attach to a 2″ ball hitch. Simply lower the Adapter over the 2″ ball, slide the pin coupler over the adapter so that the 3/8″ holes align, and insert the 3/8″ detent pin to secure. The overlap of the pin coupler tabs takes up the space of the 1/8″ and does not allow the Adapter to bounce off. Can also be used as a ring on a pintle hook.
0.125 ABS plastic Lower Weight Cushion allows for easy replacement of damaged cushion on the 20″ SNO-BLASTER or PATH-MASTER chassis’.
Material: 0.125″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 15-1/4″ x 15-3/4″
Includes: (2) Pre-installed strips of industrial double-sided adhesive tape.
Pre-bent ABS plastic bow cover allows for easy replacement of damaged weight covers on the 20″ SNO-BLASTER, PATH-MASTER, and TRAKOR chassis’.
Material: .125 ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 15-3/4″ x 15-3/4″
Includes: (2) 15″ Rubber Straps
Add strength and durability to your Loppet 60, Best-Line 76, or Path-Master Drawbars. The 20″ Drawbar Spreader has been designed to easily add the control and reduce twisting when grooming snow in rough terrain. Made from carbon steel and sealed with a matching black power coat paint to last the life of your grooming chassis.
Measurement: Overall – 3/4″ x 3/4″ x 23″
Material: 3/4″ Square Carbon Steel Tubing
Finish: Bengal Black Powder Coat
Hardware Kit:
(2) 3/8-16 x 2″ Stainless Steel Hex Bolt
(2) 3/8-16 Stainless Steel Nylock Nuts
Measurement: 6-1/2″ x 7-1/4″
Material: 12 GA Carbon Steel Plate
Finish: Bengal Black Powder Coat Paint
Hardware Kit:
20″ Snow Groomer Comb
One flexible 20″ Chassis Urethane Comb.
Material: Heat Cured Pour Mold Urethane
Measurement: 19-3/4″ x 8-1/2″ (Overall) 19-3/4″ x 6-1/2″ (Comb)
Combs: 25 comb slots
Thickness: 5/8″ (Combs) 1/8″ (Mounting Tab)
2024 SNO-RAZOR® V2.0 – UPGRADE KIT
Do you already have a SnoMaster 48 or 72 built before 2024? Upgrade it now to Version 2.0!
Build YOUR perfect SNO-RAZOR® UPGRADE KIT with the options below!
**Does not include the Chassis.
Measurement: Approximately 14-1/2″ x 24″ (Overall), 6″ x 5/8″ (per Comb)
Material: Black Urethane
Combs: 30 corduroy combs per
Includes: (2) 24 inch combs, (14) #66 Pop Rivets, (6) #68 Pop Rivets