3/8″ Orange Handle Detent Pin
$25.003/8″ Orange Handle Detent Pin
- Measurement: 3/8″ Diameter, 2″ Usable length
- Material: Carbon Steel Pin
- Breaking Strength, lbs: 11,000 lbs measured as single shear, or force required to break pin into two pieces
Showing 17–32 of 107 results
36″ Deflector Bracket
$150.0036 inch Deflector Bracket
Measurement: Approximately 1″ x 1″ x 35-3/4″
Material: 11 GA Square Standard Steel Tubing, 10 GA Standard Steel plate
Finish: Bengal Black Powder Coat paint
Includes: (1) 36″ Deflector Bracket, (8) 10-32 x 3/8″ Stainless Steel Truss Screw, (4) 5/16-18 x 1-5/8″ Stainless Steel Hex Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts
36″ Deflector PC/ABS Panel
$80.0036 inch Deflector PC/ABS Panel
Measurement: Approximately 13″ x 36″
Material: .135″ Polycarbonate ABS
Finish: Black, Hair cell outward side, Smooth underside
Includes: (1) 36″ Deflector panel, (8) 10-32 x 3/8″ Truss Screws
36″ DeTRAKOR Comb
$150.0036 inch DeTRAKOR Comb
Measurement: Approximately 36″ x 12″ x 5/8″
Material: Black Urethane
Includes: (1) Urethane Comb, (9) #66 Pop Rivets
Combs: 45 comb slots
48 Tow Bar Tube
$120.0048 Tow Bar Tube
Measurement: Approximately 1″ x 1-1/2″ x 42-1/2″
Material: Standard Steel Rectangle Tubing
Finish: Bengal Black Powder Coat paint
Includes: (1) SM48 Tow Bar Tube
48″ Deflector PC/ABS Panels (Set of 2-24″)
$100.0048 inch Deflector PC/ABS Panels
Measurement: Approximately 14-1/2″ x 24″
Material: .135″ Polycarbonate ABS
Finish: Black, Hair cell outward side, Smooth underside
Includes: (2) 24″ Deflector panel, (12) 10-32 x 3/8″ Truss Screws
48″ SNO-RAZOR
$1,150.00
72 Tow Bar Tube
$150.0072 Tow Bar Tube
Measurement: Approximately 1″ x 1-1/2″ x 66-1/2″
Material: Standard Steel Rectangle Tubing
Finish: Bengal Black Powder Coat paint
Includes: (1) SM72 Tow Bar Tube
72″ Cutter Assembly
$700.0072″ Cutter Assembly
Measurement: Approximately 4″ x 72″
Material: 1/4″ Standard Steel, 1/2″ Standard Steel, 10 GA Standard Steel
Finish: 300Hr Salt Spray Yellow Zinc with Sealant
Includes: (1) 72″ SNO-RAZOR Cutter Assembly
72″ Deflector PC/ABS Panels (Set of 2-36″)
$150.0072 inch Deflector PC/ABS Panels
Measurement: Approximately 14-1/2″ x 36″
Material: .135″ Polycarbonate ABS
Finish: Black, Hair cell outward side, Smooth underside
Includes: (2) 36″ Deflector panel, (16) 10-32 x 3/8″ Truss Screws
72″ SNO-RAZOR w/Deflector
$1,700.00
Additional Shear Pins w/ Wire Lock (Set of 3)
$15.003/16″ Shear Pins w/ Wire Lock (Set of 3)
Designed to shear (approximately 700 ft-lbs) at the receiver rather than causing extreme damage to the groomer if it is caught on an immovable object. Wire secures the pin from bouncing out when properly engaged. Pin meets SAE J429 specifications with a zinc plating to protect from rusting due to salt spray.
Contains (3) Wire Lock Pins
ATV Universal Hitch 3/4″
$80.00ATV Universal Hitch 3/4″
ATV 3/4″ Universal Hitch is made of 3/16″ Carbon Steel and finished with a durable Bengal Black powder coated paint. The ATV 3/4″ includes a round hole to place a 3/4″ Bolt or Ball Hitch through to attach to the receiver of your ATV (with Tracks recommended) to easily attach one of our three Pin Couplers. The ATV 3/4″ Universal Hitch includes a 5/16″ x 3-1/2″ Clevis Pin enabling 180 degree vertical movement. Vertical movement of the ATV Hitch combined with the horizontal movement along the 3/8″ Orange Handle Detent Pin (Sold Separately) offers a smooth pull even over uneven snow pack allowing the snow grooming chassis to remain flat giving you a more even snow packed trail.
