Showing 1–16 of 93 results
.093 Hitch Pins enable a secured Drawbar connection when using the Loppet 60 Drawbars, Best-Line 76 Drawbars, Path-Master Drawbars, Sno-Blaster Drawbars, or the Standard 44 Drawbar. Hitch Pin clip diameter (.093) is measured on the outside of the wire and is manufactured of Stainless Steel 18-8 with a total length of 1-5/8″. A total of (2) Hitch Pins are required when securing the Drawbars, one for each side, to a 20″ Snow Trail Grooming Chassis
(4) Stainless Steel .125 x 1-15/16 Hitch Pins
Used to secure drawbars to chassis or to secure SNO-BLASTER Clevis Pins on assembly.
Measurement: Approximately 10″ x 3-1/2″ (Tire), 5/8″ (Axle Bore)
Material: Steel Wheel, Knobby All-Terrain Rubber Tire
Finish: Silver Enamel Powder Coat paint
Maximum Work Load: 300 lbs.
(1) Left Wing & Bracket
(1) Right Wing & Bracket
(4) 1/4-20 x 7/8″ Stainless Steel Hex Bolts
(4) 1/4-20 Stainless Steel Nylock Nuts
Used on SNO-MASTER 48, SNO-MASTER 72, SNO-BLASTER, TRAKOR, and PATH-MASTER
3/8″ zinc coated 2″ Ball Adapter is designed to work with a Snow Groomers Pin Coupler to quickly attach to a 2″ ball hitch. Simply lower the Adapter over the 2″ ball, slide the pin coupler over the adapter so that the 3/8″ holes align, and insert the 3/8″ detent pin to secure. The overlap of the pin coupler tabs takes up the space of the 1/8″ and does not allow the Adapter to bounce off. Can also be used as a ring on a pintle hook.
0.125 ABS plastic Lower Weight Cushion allows for easy replacement of damaged cushion on the 20″ SNO-BLASTER or PATH-MASTER chassis’.
Material: 0.125″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 15-1/4″ x 15-3/4″
Includes: (2) Pre-installed strips of industrial double-sided adhesive tape.
Pre-bent ABS plastic bow cover allows for easy replacement of damaged weight covers on the 20″ SNO-BLASTER, PATH-MASTER, and TRAKOR chassis’.
Material: .125 ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 15-3/4″ x 15-3/4″
Includes: (2) 15″ Rubber Straps
Add strength and durability to your Loppet 60, Best-Line 76, or Path-Master Drawbars. The 20″ Drawbar Spreader has been designed to easily add the control and reduce twisting when grooming snow in rough terrain. Made from carbon steel and sealed with a matching black power coat paint to last the life of your grooming chassis.
Measurement: Overall – 3/4″ x 3/4″ x 23″
Material: 3/4″ Square Carbon Steel Tubing
Finish: Bengal Black Powder Coat
Hardware Kit:
(2) 3/8-16 x 2″ Stainless Steel Hex Bolt
(2) 3/8-16 Stainless Steel Nylock Nuts
Measurement: 6-1/2″ x 7-1/4″
Material: 12 GA Carbon Steel Plate
Finish: Bengal Black Powder Coat Paint
Hardware Kit:
20″ Snow Groomer Comb
One flexible 20″ Chassis Urethane Comb.
Material: Heat Cured Pour Mold Urethane
Measurement: 19-3/4″ x 8-1/2″ (Overall) 19-3/4″ x 6-1/2″ (Comb)
Combs: 25 comb slots
Thickness: 5/8″ (Combs) 1/8″ (Mounting Tab)
Measurement: Approximately 14-1/2″ x 24″ (Overall), 6″ x 5/8″ (per Comb)
Material: Black Urethane
Combs: 30 corduroy combs per
Includes: (2) 24 inch combs, (14) #66 Pop Rivets, (6) #68 Pop Rivets
Measurement: Approximately 14-1/2″ x 24″ (Overall), 6″ x 5/8″ (per Comb)
Material: Black Urethane
Combs: 30 corduroy combs per
Includes: (3) 24 inch combs, (21) #66 Pop Rivets, (9) #68 Pop Rivets